JBL JRX215 15'' 2-Way Passive Speaker
Departments > Pro Audio & Recording > PA Speaker Cabinets > Speakers - Full Range-Passive > JBL > JRX215 15'' 2-Way Passive Speaker
This trapezoidal, 15" speaker system is at home in live sound, dance music and speech reinforcement.
Features:
• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles.
• Attractive 18-gauge perforated steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speakers to tilt 10 degrees for more uniform audience coverage.
Specifications:
• Power Rating: 250 W / 1000W
• Frequency Range (-10 dB): 41 Hz - 18 kHz
• Frequency Response (+/- 3 dB): 59 Hz - 13 kHz
• Sensitivity (@1m): 99 dB SPL (1w/1m)
• Nominal Impedance: 8 ohms
• Recommended Amplifier Power: 250 W to 500 W into 8 ohms
• Maximum SPL: 129 dB
• Nominal Dispersion: 90 x 50 degrees
• Crossover Freq.: 2.2 kHz
• Dimensions: 27.5 in x 18.1 in x 17 in
• Weight: 60.5 lbs
• High Frequency Driver: JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide
• Low Frequency Driver: JBL M115-8A
• Input Connectors: Neutrik Speakon NL-4 (x1); .25in TS phone jack (x1); parallel
Features:
• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles.
• Attractive 18-gauge perforated steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speakers to tilt 10 degrees for more uniform audience coverage.
Specifications:
• Power Rating: 250 W / 1000W
• Frequency Range (-10 dB): 41 Hz - 18 kHz
• Frequency Response (+/- 3 dB): 59 Hz - 13 kHz
• Sensitivity (@1m): 99 dB SPL (1w/1m)
• Nominal Impedance: 8 ohms
• Recommended Amplifier Power: 250 W to 500 W into 8 ohms
• Maximum SPL: 129 dB
• Nominal Dispersion: 90 x 50 degrees
• Crossover Freq.: 2.2 kHz
• Dimensions: 27.5 in x 18.1 in x 17 in
• Weight: 60.5 lbs
• High Frequency Driver: JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide
• Low Frequency Driver: JBL M115-8A
• Input Connectors: Neutrik Speakon NL-4 (x1); .25in TS phone jack (x1); parallel
There are currently no reviews for this product, be the first to write one!
