Sennheiser Ambeo VR 3D Audio Capture Microphone - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

Sennheiser Ambeo VR 3D Audio Capture Microphone

Add to Wish List
SKU: # 494551
Model: #



The elegantly designed AMBEO VR Mic has been developed in cooperation with VR content producers and fine-tuned through an extensive creators' program with participants from across the audio and VR communities. The mic caters exactly to the needs of VR content creators, letting you capture the experience and spirit of any location enabling the listener to be immersed as if they were there.

The AMBEO VR is an ambisonic microphone fitted with four matched KE 14 capsules in a tetrahedral arrangement. This special design allows you to capture the sound that surrounds you from a single point. As a result you get fully spherical ambisonics sound to match your VR video/spherical 360 content.

• Frequency response: 20 Hz to 20 kHz
• Max. sound pressure level: 130 dB(A) for 1 kHz
• Transducer principle: Pre-polarized condenser microphone
• Microphone connector: DIN12M, use enclosed adapter cable to convert to 4x XLR3M
• Polarity: Pin1 (GND), Pin2 (+), Pin3 (-)
• Pick-up pattern: 4x cardioid, in A-format arrangement (1: front-left-up [FLU], 2: front-right-down [FRD], 3: back-left-down [BLD], 4: back-right-up [BRU])
• Nominal impedance: Approx. 200 ohms
• Min. terminating impedance: 1000 ohms
• Storage temperature: -20 C to 70 C (-4 F to 158 F)
• Operating temperature: -10 C to 55 C (14 F to 131 F)
• Equivalent noise level: 18 dB-A as per IEC 61672-1 / 27 dB CCIR as per CCIR 468-3
• Power supply: 4x phantom powering (P48) as per IEC 61938 (48 4 V), 7 mA each
• Sensitivity: 31 mV/Pa (-30 dBV)
• Operating relative humidity: Max 90% at 40 C
• Matrix reference: Center of the capsule holder
• Mixing to B-format W = FLU + FRD + BLD + BRU / X = FLU + FRD BLD BRU / Y = FLU FRD + BLD BRU / Z = FLU FRD BLD + BRU
There are currently no reviews for this product, be the first to write one!