SPL Headphone Monitoring Amplifier - Silver - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

SPL Headphone Monitoring Amplifier - Silver

Departments > Pro Audio & Recording > Headphones > Headphone Amplifiers > SPL > Headphone Monitoring Amplifier - Silver
Add to Wish List
SKU: # 417637
Model: #

PHONITOR 2 SILV

Online

Introducing the successor of the legendary Phonitor headphone preamp. We have kept all proven features while incorporating some major improvements as such, the new Phonitor can be used as the ultimate monitor controller and preamp for three different sources. Likewise, we revised the 120-Volt technology in order for it to perform better, which resulted in our measurement gear being outclassed.

FEATURES

NEW in Phonitor 2
• Preamplifier/Monitor Controller functionality
• Suited for all headphones and impedances
• Volume remotely controllable

Special Features
• The Reference ─ the Phonitor2 sets new technical and sound standards.
• Dual-channel 120 Volt amp for headphones and active loudspeakers or power amps
• For dynamic and balanced headphones
• Optimallyy suited for low-impedance headphones starting from 10 Ohm (40 Ohm for balanced headphones)
• Remote volume control with motor potentiometer
• High-resolution laterality correction compensates right/left hearing differences
• Switchable level adjustment (consumer to professional level, 1:1, +6dB, +12 dB)

Applications
• Stereo preamplification and headphone amplification for three sources
• High-quality music playback at home
• Central monitoring unit with phase reverse L/R , solo L/R, mono switch functions
• Laterality control to compensate hearing imbalances
• Headphone amplifier for all headphone systems and impedances (from 10Ω)
• Loudspeaker simulation with headphones
• Monitoring alternative in studios and mobile units
• Adjustment of headphone playback to match familiar monitor speakers
• Mobile reproduction of usual monitoring conditions

SPECIFICATIONS

Inputs
• XLR connectors, electronically balanced
• Impedance: bal. ca. 20 kΩ, unbal. ca. 10 kΩ
• Max. Input Level: +32,5 dBu

Outputs
• Monitor/Line Outputs: XLR connectors, electronically balanced
• Frequency Range: 4 Hz to 480 kHz ( -3 dB)
• CMR: -82 dBu (at 1 kHz, 0dBu input level and unity gain)
• Crosstalk at 1 kHz: -106 dB
• THD&N at 1 kHz: 0,00085 % (at 0dBu input level and unity gain)
• Noise: Unweighted -101,87 dB; A-weighted -104,76 dB; CCIR: -96,1 dB
• Dynamic Range: 134,37 dB

Headphone Output
• 6.3-mm TRS connector
• Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
• Impedance: 0,18 Ω
• Attenuation Factor: 180 @ 40Ohm
• Frequency Range: 4 Hz to 480 kHz ( -3 dB)
• CMR: -106 dBu (at 1 kHz, 0dBu input level and unity gain)
• Crosstalk at 1 kHz: -106 dB
• THD&N at 1 kHz: 0,00091 % (at 0dBu input level and unity gain)
• Noise: Unweighted -101,12 dBu; A-weighted - 103,98 dBu; CCIR -95,02 dBuDynamic Range:133,62 dB

Power Amplifier
• Max. Output Power:
• 65m W (+20 dBm) at 1 kHz and 600 Ω connected impedance
• 560 mW (+20 dBm) at 1 kHz and 40 Ω connected impedance

Power Supply
• Voltages: 230 V AC, 50 Hz / 120 V AC, 60 Hz
• Power Consumption: max 23,7 VA
• Fuses: 100-120 V AC: T 1 A / 200-240 V AC: T 630 mA

Measurement & Weight
• Height x Width x Depth: 99 x 277 x 305 mm / 3.9 x 10.9 x 12 in
• Weight: 4,3 kg / 9.5 lbs
• 0 dBu = 0,775 V. Specifications subject to change without notice.
There are currently no reviews for this product, be the first to write one!