Schoeps CMC 1 U Miniature Microphone Amplifier - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

Schoeps CMC 1 U Miniature Microphone Amplifier

Departments > Pro Audio & Recording > Mic Preamps & DI Boxes > Microphone Preamps > Schoeps > CMC 1 U Miniature Microphone Amplifier
Add to Wish List
SKU: # 756792
Model: #

CMC 1UG

Online

Complete alternative to the renowned CMC 6
Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
Suitable mounting accessories are already available, such as the CINELA E-OSIX-CMC1U and the Rycote INV-6 elastic suspensions.

The CMC 1 is our new, small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

At SCHOEPS, "uncompromising miniaturization" means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

• high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
• very low current consumption: 2.0 mA at 48 Volts
• operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
• very high immunity from RF interference with the SCHOEPS RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
flat frequency response
• very low distortion constant output impedance across the audio frequency range
• balanced, direct-coupled, class-A output circuit
• output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus
• A complete Colette-series microphone consists of an MK capsule and a CMC amplifer. All capsules and active accessories of the Colette system are compatible with the CMC 1.

The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts--an advantage for battery-powered operation

Specifications
Frequency range: 20 Hz-20 kHz
Maximum output voltage: 1,8 V (5 dbV) with 1 kΩ load
Maximum sound pressure level (THD < 0.5 %):
• 135 dB-SPL (P48) with MK 4
• 131 dB-SPL (P12) with MK 4
Low cut filter: 20 Hz, 12 dB/oct
Output impedance: 50 Ω +/- 1 Ω (8 Hz - 50 kHz)
Minimum recommended load impedance: 1 kΩ
Common mode rejection ratio (at 1 kHz): > 55 dB
Maximum cable length: > 400 m / ~1300 ft
SCHOEPS RFI Shield: Yes
Powering standard / Valid range:
• P48 / 30-52 V
• P12 / 11-13 V
Current consumption:
• 2 mA (P48)
• 3 mA (P12)
Output: XLR-3M, analog, 1 channel
Length: 36 mm / ~1.4"
Diameter: 20 mm / 0.8"
Weight: 36 g / 1.3 oz
Finish: Matte Gray
There are currently no reviews for this product, be the first to write one!