Radial JS2 Passive 2-Way Microphone Splitter - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

Radial JS2 Passive 2-Way Microphone Splitter

Departments > Pro Audio & Recording > Mic Preamps & DI Boxes > Mic/line Splitters > Radial > JS2 Passive 2-Way Microphone Splitter
Add to Wish List
SKU: # 210178
Model: #

R800 1022


The JS2[trade] is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with one transformer-isolated output and two direct outputs.

Portable mic splitting on stage or in the studio
The JS2 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

JS2 for a 2-way split
The Radial JS2 is the perfect interface for splitting a microphone to feed more than one mixer at the same time. 100% isolation eliminates potential ground loops between the two consoles for quiet performance. The main output provides a 48V phantom power return path to the mic.
JS2 to compare two mic preamps
In the studio, it is often advantageous to compare the sound of two mic preamps on a particular voice. The JS2 is ideally suited for this as it will not color the sound of the mic or add distortion. The plug & play simplicity makes set up quick.

• Send one microphone signal to three destinations simultaneously
• Jensen transformer-equipped for exceptional audio quality
• Eliminates hum and buzz caused by ground loops
• Single isolated output provides optimal noise rejection
• Completely passive, no power needed

Audio circuit type: Passive mic/line splitter, transformer based
Transformer: JT-MB-CPC, 1:1 ratio
Number of channels: Three-way splitter (one in/three out)
Frequency response: 20Hz ~ 20KHz (+0dB/ -2dB)
Dynamic range: 140dB
Total harmonic distortion: 0.0005% @ 1kHz
Phase Deviation: 0.7⁰ @ 100Hz; 2.8⁰ @ 20Hz
Input Impedance: 2.4k Ohms, unbalanced
Output Impedance: 150 Ohms, balanced
Maximum Input: +25dBu @ 1kHz
There are currently no reviews for this product, be the first to write one!