Tech 21 VT Bass 200 1x12 200W Bass Combo Amplifier - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

Tech 21 VT Bass 200 1x12 200W Bass Combo Amplifier

Departments > Guitars > Bass Amps > Bass Solid State Combo > Tech 21 > VT Bass 200 1x12 200W Bass Combo Amplifier
Add to Wish List
SKU: # 695382
Model: #


Limited stock available in select stores only

The VT Bass 200 is a 200-Watt, 1x12 bass combo amp with an all-analog SansAmp pre-amp and Class D power amp. Housed in an easily portable, lightweight, rear-ported 1x12 cabinet, the VT Bass 200 offers an exceptional range of vintage and modern bass tones.


• Active tone controls, cut or boost 18dB, with switchable mid frequency (500Hz-1kHz)
• Piezo-friendly 1/4" high impedance 4.7 Meg-Ohm input with -10dB Pad switch
• Balanced XLR direct output with -20dB pad and ground lift switch
• Effect Loop with bypass switch to double as a mute
• -12dB input pad
• Dedicated, studio-grade 1/4 headphone output
• Dedicated, studio-grade 1/4 auxiliary input for audio devices
• 12" custom-design speaker
• Extension speaker output
• Tweeter with defeat switch
• Rear vented
• Worldwide power supply


Input Impedance: 4.7MΩ / 10 kΩ with Pad
Input Level: 150mV / 500mV with Pad
Minimum Load Impedance: 4Ω total
Maximum Power Output: 200 Watts RMS @ 4Ω (total minimum load)
Power Amp Input Impedance: 10kΩ
Power Amp Input Level: 1V to clipping
Pre-Amp Output Impedance: 1kΩ
Pre-Amp Output Level: 1V nominal*
Aux In Impedance: 10kΩ
Phones Input Impedance: 32Ω
XLR Output Level (selectable): 0 to -20dBm*
Maximum Power Consumption: approx. 280VA
AC Input Power: 100-240 VAC
Cycles: 50/60 Hz
Speaker: 200W - 8Ω; 12-inch stamped-frame
Dimensions (L x H x W): 17.5" x 17.5" x 14"
Weight: 28 lbs.

*Actual levels will vary with your settings.
There are currently no reviews for this product, be the first to write one!