Coles 4104 Commentator's Noise Cancelling Ribbon Microphone W/ Push-To-Talk Button - Long & McQuade Music Educator Site
Proudly Canadian since 1956  Canadian Flag
  Main Menu

Coles 4104 Commentator's Noise Cancelling Ribbon Microphone w/ Push-To-Talk Button

Departments > Pro Audio & Recording > Microphones & Vocal Processors > Mics - Ribbon > Coles > 4104 Commentator's Noise Cancelling Ribbon Microphone w/ Push-To-Talk Button
Add to Wish List
SKU: # 692937
Model: #



The 4104 Commentator's Noise Cancelling Ribbon Microphone is of British Broadcasting (BBC) design and used for reproducing high quality commentary speech from noisy surroundings by cancelling out a considerable degree of background noise.

The 4104 is not unduly affected by wind noise and can be used in air stream velocities up to 20 mph (32 km) without notable difference in speech quality. With the use of a simple windshield attachment good quality speech reproduction can also be achieved in winds ranging up to 40 mph (64 km) or more. Importantly, the polar response is effectively bi-directional allowing one or more commentators to make clear individual commentary close side by side without interference from mutual cross over talk.

The integrated Push-to-Talk button ensures that you transmit only when you mean to. Simply press the PTT button, and the mic becomes active. It deactivates when the button is released, allowing you to talk behind-the-scenes.

• Better than 30 dB average discrimination between voice and background noise
• Provides speech of broadcast quality completely free from breath noises
• Flat frequency response at the controlled talking distance
• Lightweight, robust construction
• Ideal for commentating and reporting purposes where background noise levels are high
• Good discrimination between wanted and unwanted sounds
• Clear individual commentary without mutual cross over talk

• Ribbon: Pressure gradient transducer
• Polar Response: Bidirectional
• Frequency Response: 60 Hz to 12000 Hz
• Distortion: Less than 1% at 120 dB SPL
• Impedance: 300 OHM
• Sensitivity: -50dB W.R.T. IV/Pa.
• Body Housing: Brass perforated case with stainless steel nose and mouth screens, PVC covered handle designed to provide a natural holding position
• Connection: XLR 3-pin - Pin 1 screen - Pin 2 positive - Pin 3 negative
• Finish: Brown enamel paint with brown PVC covered handle
• Dimensions: 200 mm L x 57 mm W x 76 mm D
• Weight: 283 g
There are currently no reviews for this product, be the first to write one!